Rainwater Tank Pumps Sydney - Repaired, Replaced, Priced Upfront
Tank pump stopped, a leaking filter or fitting, or toilets that will not fill from the tank? Our licensed plumbers find the fault and repair or replace the pump, filter or pipework across Sydney, with the price agreed before any work starts.
- $0 call-out fee*No charge just to come and look
- Fixed Price QuotesUpfront pricing before work starts
- Aussie owned & operatedFamily-owned in Sydney since 2010
- Lifetime guaranteeIf our work fails, we fix it
Licensed & insured · Lic #306457C
Get a Free Tank And Pump Quote
60 seconds · no obligation
The Tank And Pump Problems We Fix
Find yours below. Whatever it is, you get a fixed price before any work starts.
Tank Pumps
A tank pump that has stopped working, checked on site and replaced when it has failed, including a pump you have bought yourself.
Tank Filters
A cracked or leaking filter on the line from the tank, replaced with a new filter and canister.
Leaking Tank Pipework
Drips at the tank tap, valves or fittings, and leaks in the pipes running back to the house.
Toilets Not Filling
Toilets or the laundry on tank water that have stopped getting water, traced back from the cistern to the tank.
Old Tank Removal
An unwanted tank drained, disconnected and taken away, with the pipework capped and the house back on mains water.
Common Rainwater Tank And Pump Faults
Three ways a tank system fails. All three end the same way: found, fixed and tested, with the price agreed before we start.
Burst Pipe At The Tank
Pump Stopped, No Water
Slow Drip Or Old Tank
How We Fix A Rainwater Tank Pump
Rainwater tank pump repairs Sydney-wide, done properly: find the fault, fix it, test it, and agree the price first.
Find The Fault
We isolate the water and power at the pump, then check the pump, its controller, the filter and the fittings back to the house. You see what has failed before anything is replaced.
Repair Or Replace
Leaking fittings are remade, a cracked filter is replaced, and a failed pump or rain-to-mains switch is swapped for a new one at the price you agreed. We can also fit a pump you have already bought.
Test Before We Leave
We pressure test the line, check the pump starts and stops as it should, and make sure the taps and toilets it feeds are getting water.
Rainwater Tank And Pump Prices, Set Before We Start
Tank and pump jobs can turn up surprises. These three promises make sure the price is not one of them.
Fixed Price Quotes
Once we have found the fault, you get one price for the whole job, parts and labour included. The price you say yes to is the price you pay.
No Call-Out Fee*
Getting a plumber out to look at your tank or pump costs you nothing during business hours. Nothing is charged for the work until you have said yes to the price.
Pay Later At 0%
A new pump or taking out an old tank should not have to wait for payday. Spread the fixed price over a 0% interest payment plan and get the water flowing again.
Get The Tank Water Flowing Again.
Tell us what the tank or pump is doing and a licensed plumber will call you straight back with a time and a fixed price.
- Same-Day Service Sydney-Wide
- Upfront Fixed Pricing
- Lifetime Workmanship Guarantee
- 0% Interest Payment Plans
- Licensed & Insured (#306457C)
*Terms and conditions apply.
Get a Free Tank And Pump Quote
60 seconds · no obligation
Upfront fixed pricing quoted before any work starts. Terms and conditions apply.
Recent Rainwater Tank Jobs Across Sydney
Suburbs where we have recently worked on rainwater tanks, pumps and fittings. Your local team is closer than you think.
Video Testimonials
Rainwater Tank And Pump FAQs
Answer:
It depends on what has failed. A leaking tank tap or fitting is a small job, while a new pump costs more and the price depends on the pump and how much pipework changes. Either way you get one fixed price before we start.
Answer:
Check the simple things first: that the pump has power, that there is water in the tank and that the filter is not blocked. If it still will not run, the pump or its controller may have failed. We test it on site and tell you whether it can be fixed or needs replacing.
Answer:
Yes. We fit the pump you have supplied to your existing pipework and test it before we leave. Check it suits your tank and what it needs to supply, or send us a photo of the setup and we will tell you.
Answer:
Toilets and laundries on tank water stop filling when the tank is empty, the pump has stopped, or the switch that changes them over to mains water has failed. Check the tank level and that the pump has power first. If they still will not fill, we trace the fault from the tank to the cistern.
Answer:
It changes the toilets and laundry over to mains water when the tank runs low, so they keep working in dry weather. When the switch fails, the fixtures it supplies can stop getting water. We replace a faulty switch, or take the system out and connect the house straight to mains if you no longer want to use the tank.
Answer:
Leaks often come from the fittings rather than the tank itself: the tank tap, an outlet fitting, a filter or a valve, and those can often be fixed on the spot. A crack or split in the tank body is a different problem, and we will tell you on site what your options are.
Answer:
Yes. If you have bought a tank, we connect it: the downpipes into the inlet, the overflow, and the pump and pipework to whatever it will supply. Tell us where the tank will sit and what you want it to run, and we will quote the connection upfront.
Answer:
Yes. We drain and disconnect the tank, take it away, cap off the old pipework and reconnect anything that ran on tank water to the mains. Downpipes that fed the tank are redirected to the stormwater.
