Plumber Canterbury

When buying a drain cleaner off a shelf you must always have the assumption that this will be a temporary fix. It will initially work a charm and problem can be solved right away however it will not work against blocked or clogged pipes.

Most liquid drain cleaners will warn you that using them can damage your pipes. They can burn or eat obstructions in the drains in saying this the chemical composition that creates a gaseous heat to burn will or can burn through the pipes or fittings of your plumbing systems.

Lets start by saying this isn’t an easy identifiable issue where you can fix the problem yourself. Poor pressure can usually be caused by clogged pipes, leaks in the water line, equipment failure, blocked service hose. Contact our professional Plumber to help you fix the issue.

Our plumbers provide $0 Callouts throughout NSW, this means our plumbers will attend your property to view your scope your works and provide you an obligation free quote.

As we have a fleet of plumbing through out NSW we do our hardest to attend your property within the shortest amount of time. As you can imagine as plumbers we do get busy and booked pretty fast if you are experiencing a plumbing emergency give us a call and let us know.

There are usually two main types of failures that can be the main source of your hot water shortage. Hydraulic and Electrical Failure:

Power Failure

If you identify the problem to be an electrical failure you must check your power supply. Start by checking if your water heater is well powered. If the system has a timer check to ensure that is working properly.

Finally, you can test the circuit breaker and the fuses that are dedicated to your water heater. A short- circuit may very well cause a hot water failure.

Hydraulic Failure

The hydraulic failure problem may come from the water heater. The water inside your tank may have difficulty heating. From resistance, it can increase the temperature of the water in the tank before sending it to the faucets.

In another case, it can be limestone formation, which will reduce the volume of water present in the tank. The limestone is rapidly formed in really hot water so don’t hesitate to lower the degree of resistance.